M36 × 4 Thread Dimensions

Basic information

Designation

M36 x 4

Thread system

ISO Metric

Series

coarse

Standard

ISO 261

Basic profile

ISO 68-1 basic profile

Flank angle

60°

Dimensions

Major diameter

36 mm

Pitch

4 mm

Threads per inch

6.35

Pitch diameter

33.4 mm

Minor diameter (external)

31.09 mm

Minor diameter (internal)

31.67 mm

Thread depth

2.454 mm

Recommended tap drill

Ø 32 mm

These figures follow the ISO 68-1 basic profile of ISO 261. A 60° basic profile has a fundamental triangle height H = 0.866025 × P, with pitch diameter d₂ = d − 0.649519 × P, external minor diameter d₃ = d − 1.226869 × P and internal minor diameter D₁ = d − 1.082532 × P; the two minor diameters differ because the external root is rounded while the internal crest is truncated. The recommended tap drill is given as nominal diameter minus pitch, which approximates 75% thread engagement — adjust it for tough materials or deep holes.

No specification in this database uses M36 × 4 yet.

Other pitches at the same 36 mm diameter — a fine pitch on a coarse diameter, or the reverse, is the usual substitution question.

Neighbouring sizes in ISO Metric.