OSB (Oriented Strand Board)
Structural panel built from oriented wood strands bonded with resin. An engineered substitute for plywood in sheathing and flooring, produced from fast-growing species.
Properties
- Family
- Wood
- Category
- engineered
- Density
- 0.65 g/cm³ · 650 kg/m³
Densityhow osb (oriented strand board) compares
No species propertiesan engineered panel is a product, not a tree
The solid wood pages here carry a set of clear-wood figures — specific gravity, bending strength, stiffness, Janka hardness and shrinkage — because a species has measured properties that belong to the tree. OSB (Oriented Strand Board) has none, and not because the data is missing: it is manufactured. What it does under load belongs to the board and to the standard it was made to — the resin, the pressing, the grade — rather than to a species. Two panels sold under the same nominal product from different plants can differ by more than two species of solid timber do.
Density is the one figure that stays comparable with the solid species, which is why it is the number this page leads with.
A panel is a composite in the strict sense — a fibre phase in a binder — and this database does have a composites family. It is filed here instead because materials are grouped by their base material, and a board is wood.
Applicationswhere osb (oriented strand board) is normally specified
Appearance & workabilitytrade experience, not measured values
- Origin
- Made from wood strands and resin
- Appearance
- Mottled strands in tan and brown, no grain direction
- Working
- Strong as sheathing; the edges are rough and it is not made to be a visible surface.
Unlike the USDA figures above, these lines are not measurements: they carry no units and no single source. They describe how the timber is generally found to behave rather than what it is guaranteed to do — read them as the consensus of the trade, not as a specification.
Practical notes
- Density varies by grade and thickness
- Rated for structural sheathing — check the grade stamp
- Edges swell on exposure to water; keep them protected
Lumber sizeswhat osb (oriented strand board) weighs in each nominal size
Lumber size databaseDressed sizes are the same for every species — a 2x4 is 1-1/2 x 3-1/2 in in oak as much as in spruce. What changes is the weight, and that is derived here from osb (oriented strand board)'s density of 0.65 g/cm³.
Tools used on itmatched on the wood family, not on this page
All toolsWhich tools work a material is a property of the family (Wood), not of the individual species — so this list is the same on every wood page, and changes when the tool data changes rather than when this paragraph does.
Frequently asked questionsthe questions this page answers about OSB (Oriented Strand Board)
How dense is OSB (Oriented Strand Board)?
Density is 0.65 g/cm³.
What is OSB (Oriented Strand Board) used for?
Typical uses are Structural sheathing, Roof decking, Floor underlay and Wall panels.
How does OSB (Oriented Strand Board) work with hand and machine tools?
Strong as sheathing; the edges are rough and it is not made to be a visible surface.