DIN 931Hexagon headExternal hexagon
DIN 931 M10 × 100 Hexagon head
DIN 931 M10 × 100 is a hexagon head bolt with a 100 mm nominal length, on a M10 × 1.25 mm metric thread. Same head as DIN 933 but with an unthreaded shank under the head. The plain shank carries shear load, which is why these are preferred for structural steelwork and machinery frames.
Diameter10 mm
Length100 mm
Pitch1.25 mm
Socket size s16 mm
Head height k6.4 mm
HeadHexagon head
DriveExternal hexagon
Dimensions
- Standard
- DIN 931
- Type
- Hexagon head bolt
- Size
- M10 × 100
- Thread
- M10 × 1.25
- Length L
- 100 mm
- Socket size s
- 16 mm
- Head height k
- 6.4 mm
- Drive
- External hexagon
- Head
- Hexagon head
Nominal values in millimetres as published in DIN 931. Estimated weight 61.654 g per piece in steel (62.046 g in stainless), calculated from the nominal geometry — real parts vary with tolerance and head chamfers.
Thread data
Full M10 thread pageDesignationM10 × 1.25 fine
Pitch1.25 mm
Major Ø10 mm
Pitch Ø9.19 mm
Minor Ø ext8.47 mm
Tap drillØ 8.75 mm
Other lengthsDIN 931 M10
All M10 specificationsInterchangeability
DIN 931 is catalogued with ISO 4014 as its equivalent designation. Dimensions are compared field by field rather than assumed identical.