DIN 7984Low socket headHexagon socket
DIN 7984 M16 × 60 Low socket head
DIN 7984 M16 × 60 is a low head socket cap screw with a 60 mm nominal length, on a M16 × 1.5 mm metric thread. Same cylindrical hex socket head as DIN 912 but with roughly half the head height, for assemblies with limited vertical clearance. Lower head means lower permissible preload than a standard DIN 912 of the same size.
Diameter16 mm
Length60 mm
Pitch1.5 mm
Socket size s10 mm
Head Ø dk24 mm
HeadLow socket head
DriveHexagon socket
Dimensions
- Standard
- DIN 7984
- Type
- Low head socket cap screw
- Size
- M16 × 60
- Thread
- M16 × 1.5
- Length L
- 60 mm
- Socket size s
- 10 mm
- Head diameter dk
- 24 mm
- Head height k
- 9 mm
- Drive
- Hexagon socket
- Head
- Low socket head
Nominal values in millimetres as published in DIN 7984. Estimated weight 126.661 g per piece in steel (127.468 g in stainless), calculated from the nominal geometry — real parts vary with tolerance and head chamfers.
Thread data
Full M16 thread pageDesignationM16 × 1.5 fine
Pitch1.5 mm
Major Ø16 mm
Pitch Ø15.03 mm
Minor Ø ext14.16 mm
Tap drillØ 14.5 mm